1203USB Allen Bradley Communications Converter, SCANport / DPI /DSI USB.
1203USB Allen Bradley Communications Converter, SCANport / DPI /DSI USB.
Allen Bradley 1203 Usb. PLC Hardware Allen Bradley 1203USB Series A, New Surplus Open The Allen-Bradley PowerFlex 1203-USB converter seamlessly connects to drives supporting DPI, DSI, and SCANport communication interfaces, auto-adjusting its baud rate for optimal data transfer. Page 5 Getting Started User-Supplied Equipment To configure the 1203-USB converter and connected Allen-Bradley drives, you must supply one of the following drive configuration software tools on your computer: Connected Components Workbench software, version 1.02 or later Connected Components Workbench is the recommended stand-alone software.
Allen Bradley PowerFlex 1203USB CABLE SCANPORT/DPI/DSI TO USB from www.plccable.com
In this blog post we will go over the steps required to set up and use the 1203 USB to communicate with your PLC Launch RSLinx software to create a driver to represent the connection on the communication port noted in step 1.
Allen Bradley PowerFlex 1203USB CABLE SCANPORT/DPI/DSI TO USB
The 1203-USB converter autobauds to the appropriate communication data rate that is used by the drive. Launch RSLinx software to create a driver to represent the connection on the communication port noted in step 1. The assigned COM port is shown in parenthesis at the end of the Allen-Bradley 1203-USB entry
PLC Hardware Allen Bradley 1203USB Series A, Used PLCH Packaging. The assigned COM port is shown in parenthesis at the end of the Allen-Bradley 1203-USB entry Step 1: Hardware Connections The first step in using the 1203 USB is to make the necessary hardware.
Allen Bradley 1203USB, SERIES A 5VDC, 130mA/12VDC/120mA USB Conv. The features of the 1203-USB converter include the following: • Connects to, and is compatible with, products that support the Allen-Bradley DPI, DSI, and SCANport drive communication interfaces (see Compatible Products on page 1-3) Page 5 Getting Started User-Supplied Equipment To configure the 1203-USB converter and connected Allen-Bradley drives, you must supply one of the following drive configuration software tools on your computer: Connected Components Workbench software, version 1.02 or later Connected Components Workbench is the recommended stand-alone software.